The DCS comes stock on all 2012 G2 models and later and is available as a retrofit kit for older models.
The Depth Control System is a height adjustable component which attaches to the G2 tooth bar that allows you to set a fixed cutting depth. Combined with the G2’s stiff, hardened steel teeth, the DCS provides cutting control that has never been available before. The system easily allows you to maintain a consistent renovation depth as the terrain varies without frequent tooth bar depth adjustments. Consistency of cut provides a big advantage for novice groomers and is greatly valued by seasoned groomers. The ability to renovate at a fixed depth without tooth diving due to changes in terrain creates greater efficiency as you are putting less load on the snowmobile. Less drag on your sled means lower fuel costs, less wear and tear and better product output at higher grooming speeds.
The Depth Control System adds a fifth stage to the G2’s snow working system which further enhances the already remarkable snow moving capability of the G2. The DCS allows for the rolling mound of snow ahead of the teeth to move more easily from side to side creating a better width leveling effect. This creates a flatter surface across your trail. Additionally, the tooth bar is less likely to plug up with sticky high-moisture snow. You can roll a consistent 4″ – 10″ snow pile in front of the Depth Control System with much less risk of a sudden snow build-up which causes more drag and potential tooth bar tripping. More free flowing snow means fewer holes, a smoother skiing surface and a better skiing experience!